|
<< Click to Display Table of Contents >> Alarms |
  
|
|
<< Click to Display Table of Contents >> Alarms |
|
Here, the system will list any alarms that have generated as a result of the schedule recalculation. There are three types of alarms that can possibly be generated:
1.Over Water Window In Zone
This alarm is generated when a station cannot finish in the provided water window. Possible reasons for this alarm being generated are the water window is too short to run all stations or the particular station has too long a runtime.
2.Recalc Unable To Generate Schedule
This alarm is generated when there is no possible combination of start times and cycle times that a station will be able to complete its required runtime. The recalculation will try to generate a combination that gets as close to the desired runtime without overwatering. For example, if a station has a total runtime of 53 minutes and max cycle time of 15 minutes, the schedule will create 4 start times with 13 minute cycle times to run for a total of 52 minutes, under-watering by 1 minute.
3.Station Lost Too Much Moisture
This alarm is generated when a station’s current depletion goes above 65% depleted. Its purpose is to notify that the station is potentially under-watering and risks getting too dry.